Product Description
Restore 10 Floor Finish Restorer & Spray Buff Brings Back Your Floor's Brilliant Shine in One Labor Saving Step!
A little bit of this floor treatment goes a long way!
Why You Need Restore 10:
- Restore 10 is a dual purpose floor enhancer and buffing compound which restores the gloss and appearance to any floor.
- Use as a mop on floor restorer for high speed and propane burnishing programs and also as a spray buffing compound for high and low speed buffing.
- Can be used on any floor and will increase gloss, appearance and durability.
- Highly mark resistant, it will harden, restore, and reinvigorate finishes that are worn from repeated buffing and burnishing.
- Use of Restore 10 creates a more even level of appearance and extend the life cycle of any finish, lowering the overall cost of floor maintenance.
- Slip Resistance is greater than 0.5% coefficient of friction. Meets or exceeds ASTM D-2047.
Usage:
- Education
- Building Service Contractors
- Retail
- Industry and Manufacturing
- Healthcare
- Hospitality and Lodging
Directions:
- Read the entire label for proper use, handling and storage before using this product.
- Floor must be clean before using.
- High speed floor restoration:
1. Dilute 1 part product with up to 5 parts water.
2. Apply to floor, allow to dry and then buff or burnish. - Spray buff:
1. Dilute 1 part product with 2 parts water.
2. Apply fine mist on floor in front of buffer/burnisher.
Specifications:
- Opaque white liquid
- Unscented
- Water thin liquid
- Sold in gallons
Note: Restore 10 is an alternative to Gel-Brite Plus Floor Restorer (item #012712) which is no longer available.
