Product Description
GreenWays Floor Finish - The Environmentally Responsible Floor Finish formulated to meet the specifications of nationally known environmental organizations.
Benefits of Using GreenWays Floor Finish:
- Special finish was developed with the environment in mind.
- Low odor makes it ideal for hospitals and nursing homes.
- Durable, high gloss, heel mark resistant.
- Detergent resistant.
- Zinc free; no heavy metals.
- Can be burnished if needed.
- Formulated to meet the specifications of nationally known environmental organizations.
Usage:
- Allow 30-40 minutes between coats. Dry time can vary due to temperature, humidity, and other conditions.
- Strip the floor. For optimum results floors must be prepared properly:
- First, thoroughly dust mop to remove any debris. For zinc metal interlocked finishes
- The use of a quality conventional stripper such as Easy-Up from Dura Wax may be needed to completely strip the floor.
- Using a “High Productivity” black stripping pad will also help in removing the conventional finishes.
- The use of a “Green” stripper may not be able to thoroughly remove your current finish.
- Rinse the floor:
- After the floor is stripped, rinse the floor with GreenWays Rinse ‘N Clean. Following the directions on the label for proper dilutions and usage.
- Rinse a second time with quality water.
- Apply the finish:
- After the floor has dried, apply 4-5 coats of GreenWays Floor Finish with a quality finish mop.
- Allow 30-40 minutes between coats. Dry time can vary due to temperature, humidity, and other conditions.
- Mopping the GreenWays Finish:
- It is very important to thoroughly dust mop the floor before mopping.
- DO NOT use any other products besides GreenWays Rinse ‘N Clean at the proper dilution (on label) to mop the floor.
- Scrubbing and Recoating:
- Use a blue or green pad with a solution made from water and an environmentally responsible cleaner such as GreenWays Rinse ‘N Clean.
- Scrub floor and rinse with Rinse ‘N Clean or quality water.
- Apply 2- 3 coats of GreenWays Floor Finish to restore the high gloss. Allow 40 minutes to 1 hour for each coat to dry before applying another coat.
Specifications:
- Complies with CARB and National VOC standards.
- Covers approximately 1,000 to 1,500 sq. ft. per gallon for the first coat. Subsequent coats cover 1,000 - 2,000 sq. ft. per gallon.
- Sold in:
- Gallons (#015701)
- Case of (4) Gallons (#015701C)
- 5 Gallon Pails (#015705)
- 55 Gallon Drum (#015755)
NOTE: Do not pour any used floor finish back into container.
